Menu
Quote 0

Dakota Ultrasonics ZX-6 Through Paint Ultrasonic Wall Thickness Gauge, Complete Kit

Dakota Ultrasonics

Item #:

  • $1,77500

Free Shipping throughout the continental USA. Learn More.

The new Dakota ZX-6 Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!

ZX-6 Features include Automatic or Manual Probe Zero maximizing accuracy, 5-position Gain Adjustment to help located the correct backwall echo and to penetrate the walls on sound-attenuating materials such as cast metals and thick materials. It also features Differential mode, Hi-Low Alarms with audible and visual indicators and Scan mode that captures the minimum thickness at 100 measurements per second (100 Hz). It also includes a special Velocity Mode to measure in terms of velocity for nodularity testing.

The ZX-6 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

The ZX-6 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

Complete Kit includes gauge, probe/cable assembly, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and operating instructions in a padded, hard plastic carrying case.

Features

  • Includes NIST-Traceable Calibration Certificate
  • Includes both Pulse-Echo Mode (Pit & Flaw Detection) and Echo-Echo Mode (Through Paint & Coatings Mode)
  • Ability to measure through paint and eliminate coatings
  • Resolution of 0.001 inch (0.01 mm)
  • Large, backlit LCD display retains last reading
  • LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero, units and stored data
  • Simple operator controls virtually eliminate training
  • Special-purpose probes are offered for a variety of applications
  • Switch-selected units for inches or mm
  • For underwater surveying, probe cable lengths up to 50 feet are optional
  • CE Certified
  • Made in USA
  • 5-Year Warranty

 

Technical Details

Range Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 6.000 (up to 19.999 inches if uncoated using T-102-2000 probe)
0.63 to 150 millimeters (up to 500 mm if uncoated using T-102-2000 probe). Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters).
Resolution .001" (0.01 mm)
Display 4½ - Digit, 0.5" Backlit LCD
Velocity Range 0.0120 to .7300 in./µs. (305 to 18,542 meters/second)
Probe 5 MHz, 0.25" Diameter (6.35 mm)
Probe Wearface PEEK (Polyethlethylketone)
Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft (15 m).
Temp. Limits Ambient: -22 to 167° F (-30 to 75° C)
Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available
Battery Type Two AA batteries (rechargeable batteries can be used)
Battery Life 45 hours continuous use
Weight 11 ounces (308 g)
Size
63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25")
Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty Gauge: 5 Years
Probes: 90 Days

 

Model Selection Guide

Selection Guide - Pit & Flaw Detection (Pulse-Echo) Mode

Model Number Maximum Coating Minimum Wall Maximum Wall
All Models 0.020" (0.50mm) 0.100" (2.54mm) 6.000" (152.4mm)

Selection Guide - Thru-Paint (Echo-Echo) Model

Model Number Maximum Coating Minimum Wall Maximum Wall
MMX-6 0.040" (1.00mm) 0.100" (2.54mm) 1.000" (25.4mm)
MMX-6-EXT 0.080" (2.00mm) 0.200" (5.08mm) 5.000" (127.0mm)

 

Measuring Limits

Minimum Radius for Convex Surfaces 0.350" (8.89 mm)
Minimum Radius for Concave Surfaces 3" (76.2 mm)
Minimum Headroom 1" (25.0 mm)
Minimum Sample Diameter 0.150" (3.8 mm)
Minimum Substrate Thickness - F na
Minimum Substrate Thickness - NFe na

 

The following accessories are compatible with the Dakota Ultrasonics ZX-6 Through Paint Ultrasonic Wall Thickness Gauge, Complete Kit. Add them to your order today:


Shipping and Returns on Dakota Ultrasonics

All Dakota Ultrasonic items ship via UPS from Cedarhurst, New York.

NDT Tool HQ accepts returns of Dakota Ultrasonic items within 30 days of purchase. There is no restocking fee but customers are responsible for the cost of return shipping except where covered by warranty.

---

General Shipping Information

All shipping options and costs are clearly indicated once you select "Continue" after entering your shipping address during the purchase process.

Free Shipping

All orders automatically qualify for FREE UPS Standard Ground shipping within the continental USA. Estimated time of delivery is 3-5 business days.

Expedited Shipping

Need it fast? Please call 1-855-808-9666 to request expedited shipping arrangements.

Shipping to Canada

flat $25 shipping charge is applied to all Canadian orders under $500. Estimated shipping times can vary when crossing international borders. Any customs and duty charges are the responsibility of the customer.

Order Confirmation

As soon as you place your order you will receive an order confirmation email.  This means that we have received your order in our system.  As soon as we receive your order we reach out to our suppliers to confirm that your product(s) is in stock and available for immediate shipment.

If your product is out of stock, on backorder or otherwise unavailable, we will reach out to you and offer a full refund.  If your product is available to ship, we will submit the order for shipment.

Order Shipment

If your product is in stock and we process the charges to your credit card, it will ship out using the shipping method you selected during the purchase process. We will send you tracking information to the email address you provide when checking out. If you do not receive your tracking information, please contact sales@ndttoolhq.com.

Damages During Shipping

Please inspect the packaging of your product(s) when it arrives. If you notice any damage to the packaging, please make note of it when signing for delivery. If your product does arrive damaged, send photos to sales@ndttoolhq.com. We will process an insurance claim on your behalf and work closely with our suppliers to ensure your warranty needs are met.

Dakota Ultrasonics is a manufacturer of high-quality industrial ultrasonic testing equipment for the petrochemical, aerospace, power generation, automotive, and other related industries.

They offer a vast selection of ultrasonic thickness gauges and are well known for producing cost-effective products which are both compact and highly reliable.

The table below highlight's the features of each thickness gauge offered by Dakota.

General Purpose & Corrosion Gauges
0-1st Echo, Dual Probe    ZX-1, ZX-2, ZX-3, ZX-5, ZX-5DL 
+ Through Coating Capability (Echo-Echo)     ZX-6, ZX-6DL, CMX, CMX-DL
+ B-Scan    MMX-7, CMX, CMX-DL 
+ A-Scan     MVX, CMX-DL+
Underwater    UMX-2 

 

 Precision Gauges  

E-E & 0-1st Echo H.F. Delay Line Probe

    PX-7, PX-7DL 

+ A-Scan  

    PVX 

 

 Velocity / Nodularity  

 0-1st Echo, Dual Probe

    VX

 

Features

  • Includes NIST-Traceable Calibration Certificate
  • Includes both Pulse-Echo Mode (Pit & Flaw Detection) and Echo-Echo Mode (Through Paint & Coatings Mode)
  • Ability to measure through paint and eliminate coatings
  • Resolution of 0.001 inch (0.01 mm)
  • Large, backlit LCD display retains last reading
  • LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero, units and stored data
  • Simple operator controls virtually eliminate training
  • Special-purpose probes are offered for a variety of applications
  • Switch-selected units for inches or mm
  • For underwater surveying, probe cable lengths up to 50 feet are optional
  • CE Certified
  • Made in USA
  • 5-Year Warranty

 

Technical Details

Range Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 6.000 (up to 19.999 inches if uncoated using T-102-2000 probe)
0.63 to 150 millimeters (up to 500 mm if uncoated using T-102-2000 probe). Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters).
Resolution .001" (0.01 mm)
Display 4½ - Digit, 0.5" Backlit LCD
Velocity Range 0.0120 to .7300 in./µs. (305 to 18,542 meters/second)
Probe 5 MHz, 0.25" Diameter (6.35 mm)
Probe Wearface PEEK (Polyethlethylketone)
Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft (15 m).
Temp. Limits Ambient: -22 to 167° F (-30 to 75° C)
Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available
Battery Type Two AA batteries (rechargeable batteries can be used)
Battery Life 45 hours continuous use
Weight 11 ounces (308 g)
Size
63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25")
Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty Gauge: 5 Years
Probes: 90 Days

 

Model Selection Guide

Selection Guide - Pit & Flaw Detection (Pulse-Echo) Mode

Model Number Maximum Coating Minimum Wall Maximum Wall
All Models 0.020" (0.50mm) 0.100" (2.54mm) 6.000" (152.4mm)

Selection Guide - Thru-Paint (Echo-Echo) Model

Model Number Maximum Coating Minimum Wall Maximum Wall
MMX-6 0.040" (1.00mm) 0.100" (2.54mm) 1.000" (25.4mm)
MMX-6-EXT 0.080" (2.00mm) 0.200" (5.08mm) 5.000" (127.0mm)

 

Measuring Limits

Minimum Radius for Convex Surfaces 0.350" (8.89 mm)
Minimum Radius for Concave Surfaces 3" (76.2 mm)
Minimum Headroom 1" (25.0 mm)
Minimum Sample Diameter 0.150" (3.8 mm)
Minimum Substrate Thickness - F na
Minimum Substrate Thickness - NFe na

 

The following accessories are compatible with the Dakota Ultrasonics ZX-6 Through Paint Ultrasonic Wall Thickness Gauge, Complete Kit. Add them to your order today:


Shipping and Returns on Dakota Ultrasonics

All Dakota Ultrasonic items ship via UPS from Cedarhurst, New York.

NDT Tool HQ accepts returns of Dakota Ultrasonic items within 30 days of purchase. There is no restocking fee but customers are responsible for the cost of return shipping except where covered by warranty.

---

General Shipping Information

All shipping options and costs are clearly indicated once you select "Continue" after entering your shipping address during the purchase process.

Free Shipping

All orders automatically qualify for FREE UPS Standard Ground shipping within the continental USA. Estimated time of delivery is 3-5 business days.

Expedited Shipping

Need it fast? Please call 1-855-808-9666 to request expedited shipping arrangements.

Shipping to Canada

flat $25 shipping charge is applied to all Canadian orders under $500. Estimated shipping times can vary when crossing international borders. Any customs and duty charges are the responsibility of the customer.

Order Confirmation

As soon as you place your order you will receive an order confirmation email.  This means that we have received your order in our system.  As soon as we receive your order we reach out to our suppliers to confirm that your product(s) is in stock and available for immediate shipment.

If your product is out of stock, on backorder or otherwise unavailable, we will reach out to you and offer a full refund.  If your product is available to ship, we will submit the order for shipment.

Order Shipment

If your product is in stock and we process the charges to your credit card, it will ship out using the shipping method you selected during the purchase process. We will send you tracking information to the email address you provide when checking out. If you do not receive your tracking information, please contact sales@ndttoolhq.com.

Damages During Shipping

Please inspect the packaging of your product(s) when it arrives. If you notice any damage to the packaging, please make note of it when signing for delivery. If your product does arrive damaged, send photos to sales@ndttoolhq.com. We will process an insurance claim on your behalf and work closely with our suppliers to ensure your warranty needs are met.

Dakota Ultrasonics is a manufacturer of high-quality industrial ultrasonic testing equipment for the petrochemical, aerospace, power generation, automotive, and other related industries.

They offer a vast selection of ultrasonic thickness gauges and are well known for producing cost-effective products which are both compact and highly reliable.

The table below highlight's the features of each thickness gauge offered by Dakota.

General Purpose & Corrosion Gauges
0-1st Echo, Dual Probe    ZX-1, ZX-2, ZX-3, ZX-5, ZX-5DL 
+ Through Coating Capability (Echo-Echo)     ZX-6, ZX-6DL, CMX, CMX-DL
+ B-Scan    MMX-7, CMX, CMX-DL 
+ A-Scan     MVX, CMX-DL+
Underwater    UMX-2 

 

 Precision Gauges  

E-E & 0-1st Echo H.F. Delay Line Probe

    PX-7, PX-7DL 

+ A-Scan  

    PVX 

 

 Velocity / Nodularity  

 0-1st Echo, Dual Probe

    VX

 


We Also Recommend