Menu
Quote 0
Dakota Ultrasonics MMX-7 High Performance Data Logging Wall Thickness Gauge

Dakota Ultrasonics MMX-7 High Performance Data Logging Wall Thickness Gauge, Complete Kit

Dakota Ultrasonics

Item #:

  • $2,12500

Free Shipping throughout the continental USA. Learn More.

The Dakota MMX-7 is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric data logging system with storage capacity of thousands of data values.

The MMX-7 features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use.

Complete Kit includes gauge, probe/cable assembly, transfer cable, FREE software, 4 oz. bottle of coupling fluid, batteries, NIST Calibration Certificate, and operating instructions in a padded, hard plastic carrying case.

Features

  • Includes NIST-Traceable Calibration Certificate
  • The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
  • Built in hardware AGC gain control for through paint measurements in multi mode operation.
  • The MMX-7 has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
  • CE Certified
  • Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
  • The MMX-7 also comes complete with our Windows® PC software for transferring data to and from a PC.
  • The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.
  • Use the AUTOFIND feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
  • Made in USA
  • 2-Year Warranty

 

Technical Details

Range in Steel: Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)

Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.100 - 4.000 inches). Range will vary depending on the thick
Resolution: .001 inches (0.01mm)
Velocity Range: .0492 to .3936 in./ms
1250 to 9999 meters/sec
Units: English & Metric
Measurement Modes: - Pulse-Echo (flaws, pits)
- Echo-Echo (thru-paint)
Transducer Types: Dual Element (1 to 10 MHz).
Memory: 16 megabit non-volatile ram
Memory capacity: 12,000 pages with 1 reading and waveform per page
Power Source: Three 1.5V alkaline or 1.2V NiCad AA cells
Battery Life: Typically operates for 150 hours on alkaline and 100 hours on NiCad
Auto Power off: if idle 5 min
Display: 1/8 in. VGA grayscale display 62 x 45.7mm
Keyboard: Membrane switch with twelve tactile keys
Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Operating Temperature: -14° to 140°F (-10° to 60°C)
Weight, net: 383 grams
Dimensions: 63.5 W x 165 H x 31.5 D mm
Warranty: 2 year limited
Certification: CE Approved, Factory calibration traceable to national standards

 

Shipping and Returns on Dakota Ultrasonics

All Dakota Ultrasonic items ship via UPS from Cedarhurst, New York.

NDT Tool HQ accepts returns of Dakota Ultrasonic items within 30 days of purchase. There is no restocking fee but customers are responsible for the cost of return shipping except where covered by warranty.

---

General Shipping Information

All shipping options and costs are clearly indicated once you select "Continue" after entering your shipping address during the purchase process.

Free Shipping

All orders automatically qualify for FREE UPS Standard Ground shipping within the continental USA. Estimated time of delivery is 3-5 business days.

Expedited Shipping

Need it fast? Please call 1-855-808-9666 to request expedited shipping arrangements.

Shipping to Canada

flat $25 shipping charge is applied to all Canadian orders under $500. Estimated shipping times can vary when crossing international borders. Any customs and duty charges are the responsibility of the customer.

Order Confirmation

As soon as you place your order you will receive an order confirmation email.  This means that we have received your order in our system.  As soon as we receive your order we reach out to our suppliers to confirm that your product(s) is in stock and available for immediate shipment.

If your product is out of stock, on backorder or otherwise unavailable, we will reach out to you and offer a full refund.  If your product is available to ship, we will submit the order for shipment.

Order Shipment

If your product is in stock and we process the charges to your credit card, it will ship out using the shipping method you selected during the purchase process. We will send you tracking information to the email address you provide when checking out. If you do not receive your tracking information, please contact sales@ndttoolhq.com.

Damages During Shipping

Please inspect the packaging of your product(s) when it arrives. If you notice any damage to the packaging, please make note of it when signing for delivery. If your product does arrive damaged, send photos to sales@ndttoolhq.com. We will process an insurance claim on your behalf and work closely with our suppliers to ensure your warranty needs are met.

Dakota Ultrasonics is a manufacturer of high-quality industrial ultrasonic testing equipment for the petrochemical, aerospace, power generation, automotive, and other related industries.

They offer a vast selection of ultrasonic thickness gauges and are well known for producing cost-effective products which are both compact and highly reliable.

The table below highlight's the features of each thickness gauge offered by Dakota.

General Purpose & Corrosion Gauges
0-1st Echo, Dual Probe    MX-1, MX-2, MX-3, MX-5, MX-5DL 
+ Through Coating Capability (Echo-Echo)     MMX-6, MMX-6DL, CMX, CMX-DL
+ B-Scan    MMX-7, CMX, CMX-DL 
+ A-Scan     MVX, CMX-DL+
Underwater    UMX-2 

 

 Precision Gauges  

E-E & 0-1st Echo H.F. Delay Line Probe

    PX-7, PX-7DL 

+ A-Scan  

    PVX 

 

 Velocity / Nodularity  

 0-1st Echo, Dual Probe

    VX

 

Features

  • Includes NIST-Traceable Calibration Certificate
  • The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
  • Built in hardware AGC gain control for through paint measurements in multi mode operation.
  • The MMX-7 has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
  • CE Certified
  • Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
  • The MMX-7 also comes complete with our Windows® PC software for transferring data to and from a PC.
  • The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.
  • Use the AUTOFIND feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
  • Made in USA
  • 2-Year Warranty

 

Technical Details

Range in Steel: Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)

Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.100 - 4.000 inches). Range will vary depending on the thick
Resolution: .001 inches (0.01mm)
Velocity Range: .0492 to .3936 in./ms
1250 to 9999 meters/sec
Units: English & Metric
Measurement Modes: - Pulse-Echo (flaws, pits)
- Echo-Echo (thru-paint)
Transducer Types: Dual Element (1 to 10 MHz).
Memory: 16 megabit non-volatile ram
Memory capacity: 12,000 pages with 1 reading and waveform per page
Power Source: Three 1.5V alkaline or 1.2V NiCad AA cells
Battery Life: Typically operates for 150 hours on alkaline and 100 hours on NiCad
Auto Power off: if idle 5 min
Display: 1/8 in. VGA grayscale display 62 x 45.7mm
Keyboard: Membrane switch with twelve tactile keys
Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Operating Temperature: -14° to 140°F (-10° to 60°C)
Weight, net: 383 grams
Dimensions: 63.5 W x 165 H x 31.5 D mm
Warranty: 2 year limited
Certification: CE Approved, Factory calibration traceable to national standards

 

Shipping and Returns on Dakota Ultrasonics

All Dakota Ultrasonic items ship via UPS from Cedarhurst, New York.

NDT Tool HQ accepts returns of Dakota Ultrasonic items within 30 days of purchase. There is no restocking fee but customers are responsible for the cost of return shipping except where covered by warranty.

---

General Shipping Information

All shipping options and costs are clearly indicated once you select "Continue" after entering your shipping address during the purchase process.

Free Shipping

All orders automatically qualify for FREE UPS Standard Ground shipping within the continental USA. Estimated time of delivery is 3-5 business days.

Expedited Shipping

Need it fast? Please call 1-855-808-9666 to request expedited shipping arrangements.

Shipping to Canada

flat $25 shipping charge is applied to all Canadian orders under $500. Estimated shipping times can vary when crossing international borders. Any customs and duty charges are the responsibility of the customer.

Order Confirmation

As soon as you place your order you will receive an order confirmation email.  This means that we have received your order in our system.  As soon as we receive your order we reach out to our suppliers to confirm that your product(s) is in stock and available for immediate shipment.

If your product is out of stock, on backorder or otherwise unavailable, we will reach out to you and offer a full refund.  If your product is available to ship, we will submit the order for shipment.

Order Shipment

If your product is in stock and we process the charges to your credit card, it will ship out using the shipping method you selected during the purchase process. We will send you tracking information to the email address you provide when checking out. If you do not receive your tracking information, please contact sales@ndttoolhq.com.

Damages During Shipping

Please inspect the packaging of your product(s) when it arrives. If you notice any damage to the packaging, please make note of it when signing for delivery. If your product does arrive damaged, send photos to sales@ndttoolhq.com. We will process an insurance claim on your behalf and work closely with our suppliers to ensure your warranty needs are met.

Dakota Ultrasonics is a manufacturer of high-quality industrial ultrasonic testing equipment for the petrochemical, aerospace, power generation, automotive, and other related industries.

They offer a vast selection of ultrasonic thickness gauges and are well known for producing cost-effective products which are both compact and highly reliable.

The table below highlight's the features of each thickness gauge offered by Dakota.

General Purpose & Corrosion Gauges
0-1st Echo, Dual Probe    MX-1, MX-2, MX-3, MX-5, MX-5DL 
+ Through Coating Capability (Echo-Echo)     MMX-6, MMX-6DL, CMX, CMX-DL
+ B-Scan    MMX-7, CMX, CMX-DL 
+ A-Scan     MVX, CMX-DL+
Underwater    UMX-2 

 

 Precision Gauges  

E-E & 0-1st Echo H.F. Delay Line Probe

    PX-7, PX-7DL 

+ A-Scan  

    PVX 

 

 Velocity / Nodularity  

 0-1st Echo, Dual Probe

    VX

 


We Also Recommend