Menu
Quote 0

Dakota Ultrasonics PZX-7 Precision Ultrasonic Wall Thickness Gauge, Complete Kit

Dakota Ultrasonics

Item #:

  • $1,95000

Free Shipping throughout the continental USA. Learn More.

The Dakota PZX-7 is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics.

The PZX-7 has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000).

Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode

It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.

Complete Kit includes gauge, probe/cable assembly, 4 oz. bottle of coupling fluid, batteries, NIST Calibration Certificate, and operating instructions in a padded, hard plastic carrying case.

Features

  • Includes NIST-Traceable Calibration Certificate
  • Resolution of 0.0001 inch (0.001 mm)
  • Large, backlit LCD display retains last reading
  • LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units
  • Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed
  • Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications
  • Selectable units of inch or mm
  • RS-232 Data output of individual values for connection to data collection or quality control systems
  • CE Certified
  • Made in USA
  • 5-Year Warranty

Technical Details

Range in Steel 0.0060-1.0000" (0.15-25.40 mm)
Resolution .0001" (0.001 mm)
Display 4½ - Digit, 0.5" Backlit LCD
Velocity Range
0.0120 to .7300 in/μs (305 to 18,542 m/sec)
Transducer Single element with delay tip. 10 to 22 MHz frequency range.
Probe Wearface PEEK (Polyethlethylketone)
Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m)
Outputs RS-232, single value when send key is pressed
Temp. Limits Ambient: -22 to 167° F (-30 to 75° C)
Material: 0 to 200° F (-20 to 100° C)
Battery Type
2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used)
Battery Life 45 hours continuous use
Weight 11 ounces
Size 2.5" x 5.17" x 1.25"
(64 x 131.3 x 31.5 mm)
Warranty Gauge: 5 Years
Probes: 90 Days

 

Delay Line Tips for PX-7

P/N Description Standard / Optional Image
X-231-0000 1/4" x 3/8"
for all metals
(Short)
Standard
X-241-0000 1/4" x 1/2"
for all metals
(Long)
Standard
X-633-0000 1/4" x 3/8"
Graphite Tip
for thin plastics
(Graphite Short)
Standard on "-GT" models
X-532-0000 3/16" x 3/8"
Conical Tip
for all metals
(Cone)
Optional
X-132-0000 1/8" x 3/8"
Conical Tip
for all metals
(Cone)
Optional
X-533-0000 3/16" x 3/8"
Graphite Tip
for thin plastics
(Graphite Cone)
Optional

 

The following accessories are compatible with the Dakota Ultrasonics PZX-7 Precision Ultrasonic Wall Thickness Gauge, Complete Kit. Add them to your order today:


Shipping and Returns on Dakota Ultrasonics

All Dakota Ultrasonic items ship via UPS from Cedarhurst, New York.

NDT Tool HQ accepts returns of Dakota Ultrasonic items within 30 days of purchase. There is no restocking fee but customers are responsible for the cost of return shipping except where covered by warranty.

---

General Shipping Information

All shipping options and costs are clearly indicated once you select "Continue" after entering your shipping address during the purchase process.

Free Shipping

All orders automatically qualify for FREE UPS Standard Ground shipping within the continental USA. Estimated time of delivery is 3-5 business days.

Expedited Shipping

Need it fast? Please call 1-855-808-9666 to request expedited shipping arrangements.

Shipping to Canada

flat $25 shipping charge is applied to all Canadian orders under $500. Estimated shipping times can vary when crossing international borders. Any customs and duty charges are the responsibility of the customer.

Order Confirmation

As soon as you place your order you will receive an order confirmation email.  This means that we have received your order in our system.  As soon as we receive your order we reach out to our suppliers to confirm that your product(s) is in stock and available for immediate shipment.

If your product is out of stock, on backorder or otherwise unavailable, we will reach out to you and offer a full refund.  If your product is available to ship, we will submit the order for shipment.

Order Shipment

If your product is in stock and we process the charges to your credit card, it will ship out using the shipping method you selected during the purchase process. We will send you tracking information to the email address you provide when checking out. If you do not receive your tracking information, please contact sales@ndttoolhq.com.

Damages During Shipping

Please inspect the packaging of your product(s) when it arrives. If you notice any damage to the packaging, please make note of it when signing for delivery. If your product does arrive damaged, send photos to sales@ndttoolhq.com. We will process an insurance claim on your behalf and work closely with our suppliers to ensure your warranty needs are met.

Dakota Ultrasonics is a manufacturer of high-quality industrial ultrasonic testing equipment for the petrochemical, aerospace, power generation, automotive, and other related industries.

They offer a vast selection of ultrasonic thickness gauges and are well known for producing cost-effective products which are both compact and highly reliable.

The table below highlight's the features of each thickness gauge offered by Dakota.

General Purpose & Corrosion Gauges
0-1st Echo, Dual Probe    ZX-1, ZX-2, ZX-3, ZX-5, ZX-5DL 
+ Through Coating Capability (Echo-Echo)     ZX-6, ZX-6DL, CMX, CMX-DL
+ B-Scan    MMX-7, CMX, CMX-DL 
+ A-Scan     MVX, CMX-DL+
Underwater    UMX-2 

 

 Precision Gauges  

E-E & 0-1st Echo H.F. Delay Line Probe

    PZX-7, PZX-7DL 

+ A-Scan  

    PVX 

 

 Velocity / Nodularity  

 0-1st Echo, Dual Probe

    VX

 

Features

  • Includes NIST-Traceable Calibration Certificate
  • Resolution of 0.0001 inch (0.001 mm)
  • Large, backlit LCD display retains last reading
  • LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units
  • Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed
  • Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications
  • Selectable units of inch or mm
  • RS-232 Data output of individual values for connection to data collection or quality control systems
  • CE Certified
  • Made in USA
  • 5-Year Warranty

Technical Details

Range in Steel 0.0060-1.0000" (0.15-25.40 mm)
Resolution .0001" (0.001 mm)
Display 4½ - Digit, 0.5" Backlit LCD
Velocity Range
0.0120 to .7300 in/μs (305 to 18,542 m/sec)
Transducer Single element with delay tip. 10 to 22 MHz frequency range.
Probe Wearface PEEK (Polyethlethylketone)
Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m)
Outputs RS-232, single value when send key is pressed
Temp. Limits Ambient: -22 to 167° F (-30 to 75° C)
Material: 0 to 200° F (-20 to 100° C)
Battery Type
2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used)
Battery Life 45 hours continuous use
Weight 11 ounces
Size 2.5" x 5.17" x 1.25"
(64 x 131.3 x 31.5 mm)
Warranty Gauge: 5 Years
Probes: 90 Days

 

Delay Line Tips for PX-7

P/N Description Standard / Optional Image
X-231-0000 1/4" x 3/8"
for all metals
(Short)
Standard
X-241-0000 1/4" x 1/2"
for all metals
(Long)
Standard
X-633-0000 1/4" x 3/8"
Graphite Tip
for thin plastics
(Graphite Short)
Standard on "-GT" models
X-532-0000 3/16" x 3/8"
Conical Tip
for all metals
(Cone)
Optional
X-132-0000 1/8" x 3/8"
Conical Tip
for all metals
(Cone)
Optional
X-533-0000 3/16" x 3/8"
Graphite Tip
for thin plastics
(Graphite Cone)
Optional

 

The following accessories are compatible with the Dakota Ultrasonics PZX-7 Precision Ultrasonic Wall Thickness Gauge, Complete Kit. Add them to your order today:


Shipping and Returns on Dakota Ultrasonics

All Dakota Ultrasonic items ship via UPS from Cedarhurst, New York.

NDT Tool HQ accepts returns of Dakota Ultrasonic items within 30 days of purchase. There is no restocking fee but customers are responsible for the cost of return shipping except where covered by warranty.

---

General Shipping Information

All shipping options and costs are clearly indicated once you select "Continue" after entering your shipping address during the purchase process.

Free Shipping

All orders automatically qualify for FREE UPS Standard Ground shipping within the continental USA. Estimated time of delivery is 3-5 business days.

Expedited Shipping

Need it fast? Please call 1-855-808-9666 to request expedited shipping arrangements.

Shipping to Canada

flat $25 shipping charge is applied to all Canadian orders under $500. Estimated shipping times can vary when crossing international borders. Any customs and duty charges are the responsibility of the customer.

Order Confirmation

As soon as you place your order you will receive an order confirmation email.  This means that we have received your order in our system.  As soon as we receive your order we reach out to our suppliers to confirm that your product(s) is in stock and available for immediate shipment.

If your product is out of stock, on backorder or otherwise unavailable, we will reach out to you and offer a full refund.  If your product is available to ship, we will submit the order for shipment.

Order Shipment

If your product is in stock and we process the charges to your credit card, it will ship out using the shipping method you selected during the purchase process. We will send you tracking information to the email address you provide when checking out. If you do not receive your tracking information, please contact sales@ndttoolhq.com.

Damages During Shipping

Please inspect the packaging of your product(s) when it arrives. If you notice any damage to the packaging, please make note of it when signing for delivery. If your product does arrive damaged, send photos to sales@ndttoolhq.com. We will process an insurance claim on your behalf and work closely with our suppliers to ensure your warranty needs are met.

Dakota Ultrasonics is a manufacturer of high-quality industrial ultrasonic testing equipment for the petrochemical, aerospace, power generation, automotive, and other related industries.

They offer a vast selection of ultrasonic thickness gauges and are well known for producing cost-effective products which are both compact and highly reliable.

The table below highlight's the features of each thickness gauge offered by Dakota.

General Purpose & Corrosion Gauges
0-1st Echo, Dual Probe    ZX-1, ZX-2, ZX-3, ZX-5, ZX-5DL 
+ Through Coating Capability (Echo-Echo)     ZX-6, ZX-6DL, CMX, CMX-DL
+ B-Scan    MMX-7, CMX, CMX-DL 
+ A-Scan     MVX, CMX-DL+
Underwater    UMX-2 

 

 Precision Gauges  

E-E & 0-1st Echo H.F. Delay Line Probe

    PZX-7, PZX-7DL 

+ A-Scan  

    PVX 

 

 Velocity / Nodularity  

 0-1st Echo, Dual Probe

    VX

 


We Also Recommend